Iron pipes and plastic pipes have different solutions for leakage
To solve the water pipe leakage problem first we must understand, the type of water pipe, is the iron water pipe or plastic water pipe, and the degree of water pipe leakage: some water pipe only slight leakage, some is a large amount of water seepage, sometimes is water pipe joint leakage, water pipe common different types of water pipe leakage situation is as follows:
1, the cause of iron water pipe leakage: iron water pipe is generally due to a long time of dripping water did not replace the water pipe in time, leading to water pipe rust corrosion.
2. Leakage of plastic water pipe: the water pipe is hardened or the foreign body blocks the water pipe for a long time and causes the water pipe to break.
Solutions to iron pipe leakage:
1. The 2cm diameter iron pipe is leaking, but the iron pipe is not made. It is only partially damaged. Cut off the position of the water pipe, in the use of the chace equipment chace buckle, in the street to connect the head!
2. The 2cm diameter iron water pipe leaks because of the overall water pipe corrosion. Close the main valve of the water pipe, and replace the two screws on the whole water pipe.
3, 20 cm diameter iron pipe leakage, if there is a problem with the joint part change. If leakage occurs in the pipe body, grind away the embroidery system of the original pipe body, and pay attention to the need to insert an iron plate closely fitting with the pipe in the repair position for reinforcement when welding repair is adopted.
Solution to plastic water pipe leakage:
1. First, use a small hacksaw to remove the water leakage -- the saw mouth should be flat.
2, use sandpaper to gently polish the newly exposed port, not too much.
3. Wipe the port clean with a clean cloth.
4. Apply the special glue on the port and let it dry for a while; Take advantage of this "bamboo joint" in the glue.
5. Connect the port to the "bamboo joint" and rotate it repeatedly until it is firm. Do the same thing to connect the other end.
6. After everything is OK, apply proper amount of glue on the joint to ensure no leakage.
